SPLITMUX Quad Screen 4K 18GB Multiviewer
26
Figure 21- PIP Screen Mode Settings
Pip Screen Mode Settings
Description
Active Channel
Select which active channel is in full screen mode
Enable full screen
Enable active input in full screen mode with overlay of PIP image. If deselected, active input
will shrink to prevent overlay of PIP image.
Enable aspect ratio
Enable to maintain the aspect ratio for all displayed images
PIP Mode
Select how many PIP images will be displayed, 1, 2 or 3 (the Active channel will be at full
screen)
PIP 1 Input
Select which input channel will be in PIP upper right position
PIP 2 Input
Select which input channel will be in PIP center position
PIP 3 Input
Select which input channel will be in PIP lower right position
PIP Horz. Position
Position of PIP images from the right side of the screen- range is 0-90% of screen width
PIP Vert Position
Position of uppermost PIP from the top of the screen- range is 0-60% of screen height
PIP Size
Size of the PIP image- range is 10-50%
Enable Scan
Enable input channel scanning when PIP Mode is set to “Single” or "Triple"
Scan Time
Set the dwell time while scanning- the amount of time (in seconds) each channel will appear in
the single PIP position- range is 0-999
Enable Active Scan
Enable full screen scanning between the inputs while in "Single" PIP mode
Note: If "Enable Scan" is selected, Active Scan will be automatic in "Triple" PIP mode
so the option to enable/disable it will not be available.
Enable Border
Place a border around each input displayed
Border Color
Choose the color of the border around each input
for options
)
Border Width
Choose the width of the border around each input- from 0-50 pixels
