SPLITMUX Quad Screen 4K 18GB Multiviewer
5
MOUNTING
The SPLITMUX comes with parts and hardware for mounting in a rack. Follow the instructions below for assembly and
installation.
The SPLITMUX can be mounted rear-facing or front-facing, so brackets will be attached to the case to enable mounting.
1. For a front-facing SPLITMUX, attach the mounting ears to the holes in the sides of the SPLITMUX using the #6-32 x 1/4”
screws provided. Tighten the screws securely.
Figure 1- Attach ear brackets to front corners
Figure 2- Assembled unit, ready to mount in rack
2. Install 4 cage nuts (provided) to the rack in locations that line up with the holes in the mounting ears on the SPLITMUX.
3. Secure the SPLITMUX to the rack using the four #10-32x3/4” screws provided. Be sure to tighten all mounting screws
securely. The SPLITMUX is ready for mounting.
Note: Do not block power supply vents in the SPLITMUX case. Be sure to enable adequate airflow in front of and
behind the SPLITMUX.
FYI: The same hole pattern is
provided at the front and rear of
the SPLITMUX, enabling the
SPLITMUX to be mounted with
the front facing out or rear
facing out.
