NTI SPLITMUX-DVI-4RT, Инструкция по установке и эксплуатации

Страница: 66 / 109

SPLITMUX - Installation and Operation Manual
ON SCREEN DISPLAY
61
AUDIO
Use arrow keys to navigate in the COMPUTER menu to the entry AUDIO and press ENTER/SELECT
to open the AUDIO window.
OSD - COMPUTER - AUDIO
“Enable audio output”:
To enable or disable the
audio output, activate or deactivate the check box
“Enable audio output”.
Selecting audio source:
Select the audio source
from the list. To ensure that the audio source is
the computer being currently operated, select
“active channel” from the list. For a fixed audio
source select one of the computers from the list.
Switch channel on audio activity:
With this
setting enabled,
SPLITMUX
automatically
switches to a channel on which an audio signal is
detected.
Volume
To adapt the volume of the audio sources
navigate to VOLUME and press enter/select.
Use this window to adjust the volume for the audio
sources in 2 db steps.
Change the volume of each channel with + and -
Note:
This window can also be opened with the hotkeys HK + -/+. This window can also be opened with the hotkeys HK + -/+.