NTI SPLITMUX-DVI-4RT, Инструкция по установке и эксплуатации

Страница: 47 / 109

SPLITMUX - Installation and Operation Manual
ON SCREEN DISPLAY
42
VIDEO OUTPUT
Navigate with the arrow keys in the CONSOLE menu to the entry VIDEO OUTPUT
Press ENTER/SELECT to open the VIDEO OUTPUT window.
OSD - CONSOLE - VIDEO OUTPUT
Use the VIDEO OUTPUT menu to choose an output
resolution supported by your monitor.
Press ENTER/SELECT to enter the selection menu.
Use arrow keys to select the desired line in the list
shown on the right and press ENTER/SELECT
for the new video format.
The new output mode is visible for 10 seconds.
Within this time you can either accept the new setting
by
pressing ENTER/SELECT or return to your original
setting by pressing ESC/EXIT.
When the output mode is set to ‘auto’,
SPLITMUX
chooses a resolution by reading the connected
monitor’s EDID data. Choose the EDID menu item to
check whether the connected monitor provides this
data.
If the monitor does not offer this data,
SPLITMUX
sets VGA mode (640x480@60Hz) as default and
activates Sync on Green.
Sync on Green can be deactivated on
SPLITMUX.