NTI SPLITMUX-DVI-4RT, Инструкция по установке и эксплуатации

Страница: 45 / 109

SPLITMUX - Installation and Operation Manual
ON SCREEN DISPLAY
40
FACTORY RESET
Navigate with the arrow keys in the CONFIGURATION menu to the Factory Reset
Press ENTER/SELECT to open the DEFAULTS window.
Use this function to reset the current settings of
SPLITMUX
to the factory default configuration. All four
input EDIDs are also reseted to their default values.
If necessary, save your current settings before using the DEFAULTS command. Execution of this command
results in a complete reset and reboot of
SPLITMUX
with factory defaults.
FACTORY DEFAULTS:
SYSTEM
HOTKEY = Multiple Hotkey / Hotkey = Ctrl + Alt
HOTMOUSE = ON / Hotmouse timeout = 5 sec.
QUAD MODE = Channel selection timeout = 5 sec.
WIN MODE = Border width = 0 sec.
Active channel= 255,255,0
Active channel= 255,136,0
OSD POSITION = centered
OSD LANGUAGE = English
SECURITY = None (security level = 0)
DISABLE CHANNEL = All four channels are active
CONTROL = Off
MODE
CURRENT = Active channel = 1, quad
START = Active channel = 1, quad
> PIP Size = 15 % Zoom factor = 1
Display mode = triple Active channel = gap;
Offset from top = 0 %
>WIN = Channel: 1, Mode:win1, Position settings depend on the
source, Aspect ratio: enabled
OSD - CONFIGURATION - FACTORY RESET