background image

SPLITMUX

  -  Installation and Operation Manual

ON SCREEN DISPLAY

44

TOUCH SCREEN

SPLITMUX

 enables the user to use a touch screen to control and switch between four computers as well 

as change display modes.

SPLITMUX

 supports a great number of USB touch screens with commonly integrated touch controllers. 

For a list of supported touch screens, please see Annex on page 

97

.

To control 

SPLITMUX

 using a touch screen, connect the touch screen to 

SPLITMUX

 by connecting 

the VGA or DVI cable from the 

SPLITMUX

 monitor port to the input of the touch screen. Connect the USB 

port of the touch screen to the 

SPLITMUX

 console USB port. Please see page 

9

 for a description of the 

SPLITMUX

 ports.

Calibration

After connecting a touch screen to 

SPLITMUX

 for the first time, calibrate the touch screen.

Open CONSOLE 

u

 TOUCH SCREEN menu, choose CALIBRATE, and press ENTER/SELECT. 

OSD  -  CONSOLE  -  TOUCH SCREEN

Four markers will be displayed in the corners of the touch screen. 
The diagram shows the first marker in the top left 

corner of the screen. 
Touching the center of the markers as accurately as 

possible yields best calibration results.  

Then repeat for the other three markers to complete 

calibration. 

Device Details

Select this option to display touch screen information 

such as the manufacturer ID and product ID. 

Содержание SPLITMUX-DVI-4RT














































































































Отзывы: