background image

SPLITMUX

  -  Installation and Operation Manual

ON SCREEN DISPLAY

25

SECURITY LEVEL 0

This is the default setting of 

SPLITMUX

. All settings are allowed and all functions are enabled.

SECURITY LEVEL 8

Security level 8 allows you to work only on one channel (computer) in a predefined display mode (Quad, 

Fullscreen or PiP mode). No settings can be changed, apart from the SECURITY menu item, where you can 

change the security level.

SYSTEM 

SECURITY

SECURITY LEVEL 7

As security level 

8

, but you can open OSD windows that only show display modes and device settings.

SYSTEM 

HDCP

CONSOLE 

VIDEO OUTPUT/EDID

VIDEO 

INPUT STATUS

COMPUTER 

NAME 1-4/ KEYBOARD / MOUSE / EDID/DDC 

HELP 

HOTKEY / ABOUT / CONTACT

SECURITY LEVEL 6

As security level 

7

, with the following additional operations:

SYSTEM  

CONTROL 

CONSOLE 

FADE

 

- Setting of active channel using front panel buttons, Hotkeys or Hotmouse 

- Selecting channel with PiP button in Quad mode 

- Changing the directly selectable PiP channel in PiP mode single direct

SECURITY LEVEL 5

As security level 

6

, with the following additional operations:

- Setting of display mode (Quad / Fullscreen / PiP) using front panel buttons, Hotkeys or Hotmouse.

SYSTEM 

TEST PATTERN 

CONSOLE 

BACKGROUND

OSD  -  SYSTEM  -  SECURITY   

Содержание SPLITMUX-DVI-4RT














































































































Отзывы: