Novus NV-DVR1600, Руководство пользователя

Страница: 67 / 88

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual
All rights reserved © NOVUS Security Sp. z o.o.
67
ADDITIONAL HDDs CONNECTING
7. ADDITIONAL HDD’s CONNECTING
Additional HDD’s can be connected to the device. These HDD’s can be set in backup or standard
recording mode expending the total system recording capacity.
Today's market provides wide selection of HDD’s compatible with this Multiplexer. Due to possibility
of multiple combinations followed by the possibility of eventual HDD’s incompatibility the
manufacturer advices to utilize only HDD identical with those which are used inside the device that
means Maxtor brand. Other HDD can be used entirely at own risk.
7.1 Installing the HDD in the swappable bay
This sub-chapter applies only to models equipped with swappable bay.
Warning: Always shut down the Multiplexer before loading/removing swappable HDD bay.
To install HDD in the swappable bay remove the lock using the key purchased with the device next
remove the swappable bay from the Multiplexer. Open the top cover by pulling down the latch
indicated by sign
OPEN .
Set HDD to SLAVE. Connect the HDD with the IDE cable and to power supply cable (make sure that
the IDE cable as well as the power supply cable are connected firmly and properly, wrong connection
may damage the unit or the IDE / power supply cable connectors). Mount the HDD to the swappable
bay and using screws secure the HDD. Close the top cover. Load the HDD swappable bay back to the
Multiplexer. Secure the HDD swappable bay with the key-lock. Power on the Multiplexer. When the
system boot process is finished the installed HDD’s information will appear. The swappable HDD will
be indicated as (
RM ). User can set the HDD operation mode ( Backup or Main ).
7.2 USB HDD connecting
Warning: It is recommended to shut down the Multiplexer before USB HDD connection.
USB HDD can be only use as a backup HDD.