Novus NV-DVR1600, Руководство пользователя, Страница: 29 / 88

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual
All rights reserved © NOVUS Security Sp. z o.o.
29
MULTIPLEXER MENU
3.3.2 Alarm Link Setup
Enter sub-menu Alarm Link Setup to define various reaction for different alarm events and types
of relays.
These settings are defined individually for each of 4 alarm relays. Alarm relay number is shown on the
bottom of the window.
Relay selection is made with numeric buttons 1, 2, 3, 4.
Following settings can be defined individually for each relay:
•
Sensor option is used to select which alarm inputs activation should change the status of alarm
relays. Free number of inputs can be marked. For example: if
Input 1
and
Input 4
are marked
then if event occurs on alarm input 1, or 4, or on both simultaneously the defined alarm relay
will be activated. Activation of remaining inputs will not activate the alarm relay.
• Events
option is used to select which of the alarm events should activate given alarm relay.
Following events are available:
♦
Disk Full - HDD capacity reached (not active if digital Multiplexer is recording in the so called
loop mode, HDD capacity status bar is not visible on the screen)
♦
Admin PW Changed
- administrator password modification
♦
Video Loss
- video signal loss on one of the channel inputs selected from the list or on
whichever inputs (with All selected)
♦
Motion - one of the cameras selected from the list detected motion detection, if All value has
been selected then alarm relay will be activated no matter which camera reports motion detection
Widok dla NV-DVR1600