Novus NV-DVR1600, Руководство пользователя, Страница: 17 / 88

NV-DVR900 / NV-DVR1600 ver. 2.0 - User’s Manual
All rights reserved © NOVUS Security Sp. z o.o.
17
2.5 Device Power On/Off
When we are certain that the AC SELECT voltage supply selection switch is set in proper position
(see page 10 for more information) we can turn on the device with the switch (to position „1”).
To activate the Multiplexer the button OPERATE should be pressed and hold for around 3 seconds.
The system start procedure will initiate what will be indicated by a blinking diodes on front panel and
sign on the monitor screen.
System Load Procedure takes dozen seconds. While its duration none of the front panel buttons or IR
Remote Control buttons should be pressed. System Load Procedure is finished if on the main monitor
screen camera images will appear along with their descriptions and system time will be displayed.
To deactivate the Multiplexer the button
OPERATE should be pressed and hold for around 3 seconds.
The following information will appear on the screen.
When this information disappears the Multiplexer can be disconnected from the power network.
WARNING: Shutting down the system in different way then the one described above may result
in data loss or Multiplexer damage.
DEVICE POWER UP