Novexx Solutions XLP 514, Руководство пользователя, Страница: 62 / 116

User Manual XLP 514/516
3.
Push the empty cardboard sleeve onto the rewinding mandrel until it stops (B, figure above).
4.
Push the ribbon roll onto the unwinding mandrel until it stops (A, figure above).
Depending on the winding direction of the ribbon (color side inside or outside), the roll must be
inserted differently:
– Colour side inside:
counterclockwise
rotation (pictures)
– Colour side outside: clockwise rotation
5. Insert the ribbon into the printer as shown (fig. above, fig. below). Fasten the end of the ribbon with
adhesive tape to the empty ribbon sleeve
6. Rotate the rewinding mandrel a few turns in a counter- clockwise direction until the ribbon is free of
folds (fig.).
7. Close the pressure lever and the front hood.
8. (Optional) If the ribbon type is used for the first time: Make the following parameter settings in the
menu Druck > Material > Folie :
– Ribbon length on page 50
– Outer ribbon Ø on page 50
– Inner ribbon Ø on page 50
Related reference
Insertion Diagrams on page 59
Edition 1 - 8/2021 62 Operation
Inserting and removing ribbon