Novexx Solutions XLP 514, Руководство пользователя, Страница: 49 / 116

User Manual XLP 514/516
Detect label length
Only works if label material is inserted.
Measures the label length and writes the value to parameter Material length . During the measurement,
the label material is fed approx. 2 label lengths.
Material type
Settings Default setting Step width Easy Plug
Endless, Punched Punched -- #PC1005, #IM
Definition of the used label material. A distinction is made between endless material and gapped ma-
terial (hole gaps, self-adhesive material with register gaps). The detected gap position corresponds to
the start of the label.
•
Endless
: If material is to be used without gaps
•
Punched
: If material is to be used with gaps
The value is overwritten by the appropriate Easy Plug command when sending label formats.
Material length
Settings Default setting Step width Easy Plug
[5...max. label length
[28]
]
100 mm 0.1 mm #PC1006, #IM
The material length (label length) is the distance between the gaps, measured from the front edge (be-
ginning) of a label to the front edge of the next label.
The value is overwritten by the appropriate Easy Plug command when sending label formats.
Material width
Settings Default setting Step width Easy Plug
6,0...max. width
[29]
100 mm 0.1 mm #PC1007, #IM
Zero position of the left border. If the printer is working in line-printer mode, alterations can be made in
millimetre units.
Label sens. type
(Label sensor type)
Settings Default setting Step width Easy Plug
Punched, Reflex, Full
size, Reflex (upper)
Punched -- #PC2015, #IM
•
Punched
: Light transmission sensor for labels with transparent or register gaps (self-adhesive labels)
•
Reflex
: w/o function
28
The max. label length depends on several factors, e. g. the memory configuration.
29
The max. width depends on several factors, e. g. the memory configuration.
Edition 1 - 8/2021 49 Product Description
Parameter menu