Novexx Solutions 64-04, Руководство пользователя

Страница: 424 / 438

10/14 Rev. 03 USER/SERVICE MANUAL Technical Data
64-xx Gen. 2/3
7
Gap detection
•
Self-initialising light transmission sensor, optional reflex sensor (at the bottom side
of the material).
•
Correction of gap displacement in feed direction is possible by modifying the gap
offset (parameter
PRINT PARAMETERS > Punch offset ),

The trigger point of the reflex mark (that is the actual label beginning) is at the
dark-to-bright change of the reflex mark.
Interpreter
Easy Plug, Line Printer, Hex Dump
Character sets
•
17 fonts including OCR-A and OCR-B,
•
3 scalable fonts,
•
Truetype fonts supported
Character modification
•
Scaling in X/Y direction up to factor 16,
•
Rotation 0, 90, 180, 270 degrees
Impression accuracy
•
In printing (y-) direction:
The impression accuracy depends on the print position. With the printout starting
directly at the punch position, the accuracy is ±0.5 mm. A distance between punch
(that is label start) and print position will add ±1% of this distance to the accuracy
fault (see fig. [3]).
•
X-direction: ± 0.5 mm.
[3] Impression accuracy in printing direction, depending on the printing position.
Light transmission sensor Reflex sensor
Setting range 2-17 mm 13-26 mm
Punch length
(in feed direction)
0.8-14 mm
4 mm
(recommended)
Punch width
(across the web)
min. 4 mm
12 mm
(recommended)
[Tab. 4] Punch dimensions and setting ranges.
+0,5
+1,0
+1,5
+2,0
mm
+3,0
Max. misalignment of the printing position
- 0,5
-1,0
-1,5
-2,0
-2,5
-3,0
50
100 150 200 mm 300
Distance
punch - printing position
Punch position
Printing
direction
0
Printing position 1 Printing position 2
Max. misalignment at
printing position 1
= 1,0 mm
Max. misalignment at
printing position 2
= 2,5 mm
Label
+1%
-1%
Punch
Z00521E
.c
d
r