Novexx Solutions 64-04, Руководство пользователя

Страница: 200 / 438

06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
83
Autom. feed back

Only 64-xx Dispenser, ALX 92x, DPM/PEM
(Default for those devices) The material initialization is always done automat-
ically, if necessary. The label material is moved forward and backward during
the initialization. The stretch of backward movement can be set with param-
eter
SYSTEM PARAMETER > Max InitFeedback
(see below).
Foil stretching
64-xx ALX 92x DPM PEM ALX 73x (PMA)

64-xx: Only standard printers (without dispenser).
After stopping and restarting the print process, the print quality can fall off for
a short stretch in the area printed first after the restart. The reason for this be-
haviour is the foil tension, which relaxes slightly due to the stopping.
The foil stretching function feeds the label material backwards for the defined
stretch befor restarting the print process. Afterwards, feeding starts befor the
printing. This stretches the foil before printing starts.
•
Advantage: High print quality from the beginning
•
Disadvantage: Higher foil consumption; lower label rate
Feedback = xx mm
Setting range: 0 to 20 mm; Step width: 1 mm; Default setting: 5 mm
Mat.end detect.
64-xx ALX 92x DPM PEM ALX 73x (PMA)
Material end detection.
The material end detection can be deactivated for processing labels with
gaps longer than 15 mm, or if using material with a high fluctuation in light
transparency (Status message „5002 material end“ is displayed even though
material is present).
Reflex
Material end detection by means of a reflex sensor.
Transparent
Material end detection by means of a transmission sensor.
Off
No material end detection.
CAUTION!
Soiling or damaging the print roller.

Endless (= not converted) material should not be processed when the ma-
terial end detection is deactivated (otherwise, printing is continued on the
print roller after material end).