Novexx Solutions 64-04, Руководство пользователя

Страница: 58 / 438

06/15 Rev. 6.01-01 USER MANUAL Einrichten
64-xx – 64-xx dispenser
18
Parameter settings for „64-xx dispenser M“
The printing/dispensing process can be triggered by foot switch or by
light barrier:
Foot switch The values preset by the manufacturer (see tab. 3) are valid for manual
triggering of the printing/dispensing via the Single-Start connector, e.g.
using a foot switch. After pressing the foot switch, one label is printed and
dispensed.

Set
DISPENSER PARA > Start source
to „
Foot switch
“.
Light barrier The dispensed label triggers a light barrier. This stops the printing/dis-
pensing until the user takes the label off. Then, the printer moves the
material back under the print head (only if „Real 1:1 Mode“ is selected,
see parameter
DISPENSER PARA > Dispense Mode
) and prints and dispenses
the next label.
Change the basic parameter setting as follows to use the light barrier for
triggering:

Set
DISPENSER PARA > Start source
to „
Light barrier
“.
Parameters settings for „64-xx dispenser A“
„64-xx dispenser A“ is equipped with a longer dispensing edge which lea-
ves enough space for closing the hood if an applicator is mounted. This
long dispensing edge has no light barrier.
Applicator The „64-xx dispenser A“ is designed to be used with the LTSI applicator.

Advice on printer operation with the LTSI applicator, see Service manual
LTSI .

Advice on setting parameters can be found in topic section Info printouts
and parameters .

Information about operation with start signal can be found in topic section
Advanced Applications , chapter „Printing with start signal“.