Novexx Solutions 64-04, Руководство пользователя

Страница: 256 / 438

06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
139

A setting description for the dancer arm of the ALX 92x backing paper rewin-
der can be found in the Service Manual, topic section „Service Electronics“,
paragraph Light sensor rewinder dancer arm (ALX)

.
Resting pos.xxx
Setup of the resting position (xxx = actual sensor value).
End pos. xxx
Setup of the End position (xxx = actual sensor value).
The setting follows in both cases this scheme:
1. Bring the dancer arm to its resting position.
2. Press the cut button (ALX 92x: Apply button)

Not the Online button (as with TTX x50)!
3. Bring the dancer arm to its end position.
4. Press the Online button.
Rewinder values
64-xx ALX 92x

64-xx: Only with „Rewinder 2000“ installed.

ALX 92x: Only valid for backing paper rewinder.
Shows the values of the position sensor at the rewinder dancer arm in centre-
and in home position.
•
xxx = Sensor value in home position
•
text = Sensor type (Opto = light barrier; Hall = hall sensor; ???? = no explicit
sensor type)
•
yyy = Sensor value in one of the following positions:
–
Centre position for 64-xx with „Rewinder 2000“ and for ALX 92x with R04A
rewinder motor output stage (--> 01/2012, recognizable with
SYSTEM
PARAMETER
>MODULE FW VERS. > Rewinder driver = „V2-T36“)
– End position for ALX 92x with M5A rewinder motor output stage (01/2012-
->, recognizable with SYSTEM PARAMETER
>MODULE FW VERS. > Rewinder driver
=
„V4-T5“)

For detailed information about setting the rewinder dancer arm refer to:
– ALX 92x: Service manual, topic section „Electronics (Gen. 3)“, chapter
„Settings“
– Rewinder 2000: Technical Manual Rewinder 2000, topic section
„Connection, Setup, Service“, chapter „Adjusting the sensor“
Rewinder values
xxx <------ text -------> yyy