Novexx Solutions 64-04, Руководство пользователя

Страница: 190 / 438

06/15 Rev. 6.00-02 USER- / SERVICE MANUAL Info-Printouts & Parameters
64-xx – DPM – PEM – ALX 92x – ALX 73x (PMA)
73

Press the online button to acknowledge the message, then the feed button to
continue printing.
Autom. dot check
64-xx ALX 92x DPM PEM
Automatic dot check
Checks the print head for defective dots. The dot check can be carried out
either after powerering on the printer or in print pauses between print jobs.
Continuous
The dot check is carried out in pauses between print jobs. If a new print job
arrives bevor the dot check is done, the print job will be prefered. The printer
then interrupts the dot check and proceeds later with the next "opportunity"
at the last tested dot.
The parameters Early dottest, Latest dottest, Dottestarea from, Dottestarea
to determine the conditions under which the dot check is executed.

Those parameters show up only,
– if "continuous" has been selected
– after the following automatic restart of the printer!
Power on only
The dot check is proceeded immediately after powering on the printer. During
testing appears the – blinking – display message:
Off The automatic dot check is switched off.
Early dottest
64-xx ALX 92x DPM PEM

Only if
SYSTEM PARAMETER > Autom. dot check
= „Continuous“.
Earliest dot check
Determines the number of printed labels, after which the dot check should at
the earliest start.
Example:
The setting 3 means that the dot check starts in the first printing pause after
three printed labels. After a successfully executed dot check starts the next
dot check again in the first pause after three printed labels.
after x label
Setting range: 1 to 9999; Unit interval: 1; default setting: 10
PrintStatus: 5110
Foil low
OFFLINE 0 JOBS
Head dot test