Novatel WAAS G-III, Руководство пользователя

Страница: 61 / 146

Commands Chapter 4
WAAS G-III Reference Receiver User Manual Rev 1 61
Table 24: Message Type
Message Type Allowed Trigger
AGCINFOB ONCE, ONTIME
ALLSQMIB ONNEW
ALLSQMQB ONNEW
ALMANACB ONCE, ONNEW
CARDSTATUSB ONCE, ONTIME
CORRDATAB ONCE, ONTIME
CORRLOCATIONB ONCE, ONTIME, ONNEW
ETHSTATUSB ONCE, ONTIME
EXCEPTIONDATAB ONCE
FACTORYDATAB ONCE, ONTIME
MEASUREMENTDATAB ONCE, ONTIME
RANGEB ONCE, ONTIME
RAWGPSSUBFRAMEWPB ONNEW
RAWFRAMEDATAB ONNEW
RAWWAASFRAMEWPB ONNEW
RXCOMMANDSB ONCE, ONTIME
SATPOSB ONCE, ONTIME
SOFTLOADSTATUSB ONCE, ONTIME, ONNEW
TIMESOLUTIONB ONCE, ONTIME
VERSIONB ONCE, ONTIME

Logs with an allowed trigger of ONNEW may also be logged with a trigger of ONCE. However,
only one log will be output, regardless of the number of related logs for each tracked signal. This
means that if 5 signals are tracked, only one of those signals will be reported for frame logs.

Although the LOG command is accepted in the Configuration and Maintenance states, some
logs (e.g. MEASUREMENTDATAB) are only output in the Operational state. If a LOG
command is provided for one of these logs in the Configuration state, the command is accepted
and saved but the log will not begin to be output until the receiver is transitioned to the
Operational state.