6
IMS-MN-LMDA42C_A.pdf
Product Related
LMD CANopen
DANGER
POTENTIAL FOR EXPLOSION
Install and use this equipment in non-hazardous locations only.
Failure to follow these instructions will result in death or serious injury.
Any use other than the use explicitly permitted is prohibited and can result in hazards.
Electrical equipment should be installed, operated, serviced, and maintained only by qualified
personnel.
Product Related
DANGER
HAZARD OF ELECTRICAL SHOCK, EXPLOSION, OR ARC FLASH
Remove all power from all devices before connecting or disconnecting inputs or outputs to any
terminal or installing or removing any hardware.
Failure to follow these instructions will result in death or serious injury.
When the system is started, the drives are usually out of the operator’s view and cannot be
visually monitored.
DANGER
EQUIPMENT OPERATION
Only start the system if there are no persons in the zone of operation.
Failure to follow these instructions will result in death or serious injury.
Drives may perform unintended movements because of incorrect wiring, incorrect parameter
settings, incorrect data, user programming bugs, or other errors. Further, interference (e.g.,
electromagnetic interference (EMI)) may cause unpredictable responses in the system.
WARNING
UNINTENDED MOVEMENT
• Carefully install the wiring in accordance with the electromagnetic compatibility (EMC)
requirements.
• Do not operate the drive system with unknown parameter settings or data.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
The designer of any control scheme must consider the potential failure modes of control paths
and, for certain critical functions, provide a means to achieve a safe state during and after a
path failure. Examples of critical control functions are emergency stop, overtravel stop, power
outage, and restart.
WARNING
LOSS OF CONTROL
• The designer of any control scheme must consider the potential failure modes of control paths and,
for certain critical control functions, provide a means to achieve a safe state during, and after a path
failure. Examples of critical control functions are emergency stop and overtravel stop.
• Separate or redundant control paths must be provided for critical control functions.
• System control paths may include communication links. Consideration must be given to the
implications of anticipated transmission delays or failures of the link.
• Each implementation of the product must be individually and thoroughly tested for proper
operation before being placed into service.
Failure to follow these instructions can result in death, serious injury, or equipment damage.
