25
Mechanical Data
IMS-MN-LMDA42C_A.pdf
LMD CANopen
Mechanical Data
NOTICE
EXCESSIVE RADIAL OR AXIAL LOADS
Radial (side) loading or axial (thrust) impacts on the shaft may result in premature bearing wear and
eventual destruction of the bearing.
• Do not place unsupported radial or side loads on the motor shaft.
• Do not allow the shaft to be subject to impact forces or otherwise struck by external objects.
Failure to follow these instructions can result in equipment damage.
Rotary Dimensions
The following graphic shows the rotary dimensions [inches (mm)].
4 x M3x0.5 THREAD
x0.15 MIN DEEP
0.079 (2.0)
0.59 ±0.01
(15.0 ±0.25)
shaft not sealed
0.941 ±0.020
(23.90 ±0.51)
1.450 (36.83)
LMAX1
LMAX2
3.449
(87.60)
Ø 0.866 +0/-0.002
(Ø 22.0 +0/-0.05)
Ø 0.1969 +0/-0.0005
(Ø 5.0 +0/-0.013)
o 1.220
(o 30.99)
o 1.662
(o 42.21)
2.058
(52.27)
#6-32 x 0.300 DP
(For earth ground)
P1
P3
P2
1
2
3
4
5
L
MAX
1
L
MAX
2
Single
in (mm)
2.78 (70.7)
3.39 (86.0)
Double
in (mm)
2.98 (75.7)
3.58 (91.0)
Triple
in (mm)
3.33 (84.7)
3.94 (100.0)
