Notifier NFS-3030/E, Руководство по программированию

Страница: 93 / 144

Abort Switches Releasing Applications
NFS-3030 Programming Manual P/N 51345:C 11/4/03 93
For example, program releasing zone ZR05 with a Manual Release Delay switch
for the following releasing selections: Delay Time = 15, Abort Switch = ULI,
Cross Zone = NO, Soak Time = 30.
When the Manual Release Delay Switch activates, the control panel replaces the
remainder of the 15-second Delay Time, if running, with a 10-second timer.
Examples:
1. The FACP programmed Delay Time begins its 15 second countdown. The
Manual Release Delay switch is pulled when the FACP delay timer has counted
down to 12 seconds. The 12 seconds remaining in the countdown are overridden
by the 10-second delay initiated by the Manual Delay switch. In this example, the
total time elapsing from FACP countdown initiation to agent release is 13
seconds, less than the original 15 second FACP Delay Timer countdown.
2. The FACP programmed Delay Time begins its 15 second countdown. The
Manual Release Delay switch is pulled when the FACP Delay Timer has counted
down to 8 seconds. The 8 seconds remaining in the countdown are overridden by
the 10-second delay initiated by the Manual Delay switch. In this example, the
total time elapsing from FACP countdown initiation to agent release is 17
seconds, more than the original 15 second FACP Delay Timer countdown.
3. The FACP programmed Delay Time is not running (as would happen if the
releasing station were pulled before an alarm registered). The Manual Release
Delay Switch is activated by the pull station. Agent release will occur in 10
seconds.
www.PDF-Zoo.com