Northrop Grumman Sperry Marine VisionMaster FT, Руководство пользователя

Страница: 512 / 533

Annex B – Static Site Radar/Chart Radar User Guide
B-4 65900010
Static Heading
On start up, the static heading value
defaults to 000.0. As a Static Site may
operate without compass input, the heading
value is always displayed as green (valid).
To obtain correct orientation of a static site picture in North Up the true
bearing at which the heading line is pointing needs to be entered.
Any heading marker offset for a transceiver will also affect this
setting and will consequently also need adjusting. For details see
Chapter 2 `Diagnostics, Commissioning and Service Mode’ section
3.3 `Tx/Rx Settings’, in the VisionMaster Ships Manual, Vol 2
To enter a heading bearing:
1. Right click on the HDG Sensor Data Display in the top left of the
screen and tick Select HDG Source . The Heading Sensor Source
window appears.
2. Click on the Static heading button, which
shows the current value in white. An
`Action Required’ window opens.
3. The `Action Required' window prompts to
enter a bearing. Either move the trackball
left or right to scroll to the correct value and
then left click. Or, enter the bearing value
using the drop down keypad, click
OK
when complete.
The manually entered heading is saved in
system memory and will persist when the
system is re-started.
Heading Line
A heading line representing the bearing can be temporarily
displayed by clicking and holding down on the HL button at the
top right of the screen (left of the Alert Status Indicator). The
heading line is removed from the screen when the button (left
or right) is released.