Northrop Grumman Sperry Marine VisionMaster FT, Руководство пользователя

Страница: 345 / 533

Radar/Chart Radar User Guide Targets
65900010 10-33
Target Repair
The Target Repair facility enables tracked targets to be repositioned if they
become separated from their target video. This is done by the operator
moving the tracked target origin to a new position.
Target Repair can only be made to tracked targets; it is not available to AIS
targets, or if the target has been selected as echo reference.
On a multi-node system, a target cannot be repaired on an ECDIS node if
the target or any targets correlated with it, fulfils the following conditions:

The target is being tracked or is active on a Radar node.

A tracked target from an external input, such as a BridgeMaster E.

The target is selected in the target tote on another node.

The target is currently in an acquisition zone on another node.
To repair a target, do the following:
1. Right click on the target to be repaired and
select Repair Target from the semi-
transparent window. The target's motion
trend vector may be moved around the
screen by moving the trackball. The target's
dot, ID number and name (if assigned)
remain in the original location.
2. To abort the target repair operation, right
click again and select Abort Repair from
the semi-transparent window. The target's vector reverts back to its
initial position.
3. Left click on the screen to fix the target at the desired location. The
target's dot and other identifying data are reassigned to the target
vector at the new position and a temporary prompt `
Target Repair
Successful' appears.
If the new position of the target is outside the maximum tracking range
or inside the minimum tracking range then the target position remains
unaltered and a temporary prompt `
Target Repair Aborted ' appears.