Northrop Grumman Sperry Marine VisionMaster FT, Руководство пользователя

Страница: 123 / 533

Radar/Chart Radar User Guide Sensor Management
65900010 4-9
Dead Reckoning values
If valid position data for own ship is not received within a short period of
time from the sensor interface the system establishes a computed position
by dead reckoning from the last valid position received using own ship’s
direction and speed.
The timeout limit applied to valid dead reckoning values defaults to 30
seconds.
The system considers position data to be invalid if the most recent usable
sample data received from a position sensor is older than the timeout limit.
LOP Values
The geographic location of own ship, determined by using Lines of Position
(LOP), may be used as the active data source for the position sensor. For
information on LOPs, see Line Of Position in Nav Tools.
CAUTION: LOP SENSOR
The amount of time that a LOP position sensor will be considered
usable is limited. Note that LOP position sensor data is dead
reckoned, and this data will become degraded after a period of
time.
To change the Position sensor source do the following:
1. Tick the button next to the source. Whenever the sensor source is
about to be changed a window prompts you to confirm the change.
2. To confirm click the Yes button, or to return to the previous sensor
source and value click the No button.
If no sensor source is currently available the user can enter manual data.
CAUTION: MANUAL SENSOR DATA
Using manual data is not the normal mode of operation. A sensor
device should be selected as soon as valid data is available.
Manual data cannot be entered if AIS input is enabled. Before
entering data turn off the AIS input, see AIS Display in Chapter 10
`Targets’