Northrop Grumman Sperry Marine VisionMaster FT, Руководство пользователя

Страница: 157 / 533

Radar/Chart Radar User Guide Navigation Tools
65900010 6-15
Or:
1. Click in the Brg field, the current bearing
value changes to green (editable). Move the
trackball left or right to decrease or increase
the value, left click to accept and exit edit mode.
2. To change the range of a line click in the Rad
field and move the trackball left or right to
decrease or increase the radius.
To define a start distance and end distance from the bearing origin to the
end of a bearing line:
1. On the display move the cursor over the tip of the line's arrow head
until the cursor symbol changes to the following graphic
2. Hold down the left key on the trackball and use the trackball to
move the bearing line along the dashed line.
3. Release the left key when the required position is displayed.
To create or edit clearing lines from the context window, do the
following:
1. Right click on the display where you want
the clearing line to begin and select either
Add Clearing Bearing Line Here or Add
Clearing Range Line Here from the
context popup window. The origin of the
clearing line is added at the point on the
display where the right click action was
done.
2. To reposition the last created clearing line move the
cursor to the area on the display where you want the
clearing line moved to and right click.
3. From the popup window select Move
Selected Clearing Line Here . The
clearing line origin is moved to the
selected position.
4. To change the start or end point of a
clearing line move the cursor over the
line, right click and select
Set Clearing Line Start/End Pt Here .
The nearest start or end point of the line is trimmed to the defined
position on the display.