Northrop Grumman Sperry Marine VisionMaster FT, Руководство пользователя

Страница: 346 / 533

Targets Radar/Chart Radar User Guide
10-34 65900010
AIS Display
The AIS Display window includes the following
areas:
 Settings All Nodes
 Filter Settings
 Other
 Target Count All Nodes
The AIS Display window may be quickly accessed
from the main screen by left
clicking on the
AIS On button at the
top right of the screen.
Settings All Nodes
AIS Input
AIS input and the display of AIS targets is turned
on or off on all nodes by ticking the
Enable Input
check box.
AIS Input can only be enabled when valid
sensor data is being transmitted.
Activate on CPA/TCPA/BCR
When this check box is enabled (default mode) a sleeping AIS target is
automatically activated when the target infringes its CPA/TCPA or BCR
limits shown in the Target Data tab folder.
If this setting is disabled all sleeping AIS targets are rendered as dotted
lines (see `AIS Rendering Conditions’ in AIS Targets) and are not activated
when target data limits are infringed.
WARNING!
THIS SETTING SHOULD NORMALLY BE ENABLED.
DISABLING AUTO-ACTIVATION FOR COLLISION AVOIDENCE
WILL MEAN THAT POTENTIALLY DANGEROUS TARGETS WILL
NOT RAISE AN ALERT.