Nortel Passport 8250, Руководство по интерфейсу командной строки

Страница: 82 / 94

82 Appendix B MIBs
241-5101-201 R2.2
CES VC set-up
The CES VC set-up table contains the basic minimum requirements to create
and delete connections.
See “CES VC set-up table” (page 82) for information
on the CES VC set-up table.
Table 24
SnmpManager table
Object Access definition
IP address NA The IP address of the management stations. The maximum of three
management stations can receive traps from the Passport 8250.
row status RC Enables the creation, deletion and viewing of the current status of
the row.
create and go: A new row is created and set to active.
create and wait: A new row is created and set to not in service.
destroy: A current existing row is deleted.
active: An existing row is available for use.
not in service: An existing row is unavailable for use.
not ready: An existing row is unavailable for use because required
information is missing.
version RC The SNMP version. Determines the type of trap sent to the SNMP
manager.
storage type RC Defines if the entry is stored in volatile or non-volatile memory.
Table 25
CES VC set-up table
Object Access Definition
board slot id RC The service board number.
port number RC The port number on the service board.
vp vc type RC The type of connection. The Passport 8250 supports permanent
virtual circuits (PVCs) circuit emulation service (CES).
vpi RC The virtual path identifier (VPI) associated with the connection.
vci RC The virtual channel identifier (VCI) associated with the connection.
(Sheet 1 of 2)