Nortel Passport 8250, Руководство по интерфейсу командной строки

Страница: 49 / 94

Chapter 3 Provisioning ports and connections 49
Passport 8250 Command Line Interface Guide R2.2
vshow
Example
The following is an example of displaying the VPI number, VCI number,
board number, and port number for connections on service board 3.
[Edgeplex CLI]: 3
[T1-3] : vshow
vpi=15 vci=101 --> card=3 port=1
vpi=15 vci=102 --> card=3 port=2
vpi=15 vci=103 --> card=3 port=3
vpi=15 vci=104 --> card=3 port=4
vpi=15 vci=105 --> card=3 port=5
vpi=15 vci=106 --> card=3 port=6
vpi=15 vci=107 --> card=3 port=7
vpi=15 vci=108 --> card=3 port=8
vpi=15 vci=109 --> card=3 port=9
vpi=15 vci=110 --> card=3 port=10
vpi=15 vci=111 --> card=3 port=11
vpi=15 vci=112 --> card=3 port=12
vpi=15 vci=113 --> card=3 port=13
vpi=15 vci=114 --> card=3 port=14
vpi=15 vci=115 --> card=3 port=15
vpi=15 vci=116 --> card=3 port=16
Deleting connections
The unmap command deletes connections mapped to ports. The syntax of the
command is:
unmap <port#i>[,<#j>]
where
<port#i>
is the first port number
[,<#j>]
is the last port number in a range of port numbers
Procedure
1 Ensure that you are accessing the correct service board number.
See “Accessing a board in the CLI” (page 24) for information on changing
board numbers.