Nortel Passport 8250, Руководство по интерфейсу командной строки

Страница: 28 / 94

28 Chapter 2 Getting started with the CLI
241-5101-201 R2.2
cd <directory path> “Flash file system
commands” (page 70)
Change the directory in flash memory.
clockconfig NTP 241-5101-200,
Passport 8250
Installation Guide Display and configure the reference clock.
dir “Flash file system
commands” (page 70) Display the files in the current directory in flash
memory.
exit “Logging out of the CLI”
(page 26) Terminate a CLI session.
faultlogclear “Deleting entries in the
fault log” (page 64) Delete the contents of the fault log.
faultlogview “Viewing entries in the
fault log” (page 63) View the entries in the fault log.
help “Getting help in the CLI”
(page 25) Display a list of the CLI commands or the syntax
of a specified CLI command.
ibconfig “Configuring the ATM
uplink port for in-band
management” (page 54) Display and set the ATM uplink port for in-band
management.
info on|off “Viewing alarm and
information messages”
(page 61) Enable or disable the display of the information
messages in the CLI. The default is off.
map “Creating connections”
(page 37) Map connections to ports.
mshow “Searching by port
number” (page 46) View ports with connections.
passwd “Changing the password”
(page 24) Change the password.
ping <host IP> “Checking for network
connectivity” (page 53) See if a remote host is reachable.
portconfig “Modifying port settings”
(page 33) Display and change the line type, line coding,
and signal mode for a port.
Table 2 (continued)
CLI commands
Command Where explained Description
(Sheet 2 of 3)