Nortel Passport 8250, Руководство по интерфейсу командной строки

Страница: 29 / 94

Chapter 2 Getting started with the CLI 29
Passport 8250 Command Line Interface Guide R2.2
Command syntax
The CLI command syntax consists of the following components:
• Command is the type of activity being performed.
— The command can be an abreviation for the activity. For example,
portconfig is an abbreviation for port configuration.
— A command can have more than one action. For example, you can
use the bootconfig command to display, and configure boot
parameters.
pwd “Flash file system
commands” (page 70) Display the current directory in the flash file
system.
reboot “Restarting Passport
8250 device using the
CLI” (page 26) Reboot the Passport 8250 from flash memory or
from a remote host.
serial NTP 241-5101-200,
Passport 8250
Installation Guide Display and set the baud rate for the serial port.
The default is 9600.
snmpcs “Modifying the community
strings” (page 60) Display and set the SNMP community strings.
status “Viewing the status of the
boards” (page 64) Display the status of the boards.
unmap “Deleting connections”
(page 50) Delete connections mapped to ports.
urconfig “Configuring the
redundant ATM uplink
port” (page 56) Display and set the redundant ATM uplink port.
ver “viewing the software
version” (page 65) Display the software version running on the
Passport 8250.
vshow “Searching by VPI or VPI/
VCI” (page 48) View ports with connections.
Table 2 (continued)
CLI commands
Command Where explained Description
(Sheet 3 of 3)