manualshive.com logo in svg

Nortel Passport 8250, Руководство по интерфейсу командной строки

Поделиться
Скачать
Nortel Passport 8250 Скачать руководство пользователя страница 52

52   Chapter 4 Other activities in the CLI

241-5101-201   R2.2

[<numPktsToRx>]

is the number of ICMP packets that the Passport 8250

device receives from the remote host. If the number of packets is unspecified,
the routine waits for only one echo reply packet. If no packets are received
within 5 seconds, the Passport 8250 displays that there is no answer from the
remote host and exits the ping command.

Procedure

1

Test that a remote host is reachable from the Passport 8250 device:

ping <hostIP> [<numPktsToRx>]

Example

The following is an example of sending a ICMP echo request packet from the
Passport 8250 device to a remote host at IP address 192.0.0.20 and asking for
the remote host to send one ICMP packet back to the Passport 8250 device.

[Edgeplex CLI]: ping 192.0.0.20 1

Configuring the ATM uplink port for in-band management

The ibconfig command configures the ATM uplink port for in-band
management. The syntax of the command is:

ibconfig [set]

where

[set]

configures the ATM uplink port for in-band management

Note: Entering the ibconfig command without the [set] parameter
displays the current in-band configuration parameters.

Содержание Passport 8250































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды