Nortel Passport 8250 Скачать руководство пользователя страница 53

Страница: 53 / 94

Chapter 4 Other activities in the CLI 53

Passport 8250 Command Line Interface Guide R2.2

For details on the ibconfig parameters, see “Ibconfig command parameters”
(page 53).

Procedure

Configure the ATM uplink port for in-band management:

ibconfig [set]

For the vpi parameter, enter a VPI number.

For the vci parameter, enter a VCI number.

For the ip parameter, enter the IP address of the Passport 8250 and the
subnet mask.

Table 7
Ibconfig command parameters

Parameter Definition

vpi

The virtual path identifier (VPI) number assigned to in-band
management over the ATM uplink port.

See “VPI/VCI assignments” (page 36) for the rules on using VPI
numbers.

vci

The virtual channel identifier (VCI) number assigned to in-band
management over the ATM uplink port.

See “VPI/VCI assignments” (page 36) for the rules on using
VCI numbers.

The IP address and subnet mask of the Passport 8250 device
denoted as <IP address>:<subnet mask>.

The network portion of the in-band IP address is different from
the network portion of the ethernet IP address.

See NTP 241-5101-200,

Passport 8250 Installation Guide for

information on the boot parameters.

enabled

Enable or disable in-band management on the ATM uplink port.
Accepted values are yes or no. The default value is no.

Note: If the enabled parameter is set to no while connected
through the in-band, the TELNET session to the CLI is
terminated. After five minutes, you can log into the CLI again
through the serial port or a TELNET session over the ethernet
port.

Содержание Passport 8250































































































Результаты поиска

Содержание Passport 8250

Отзывы:

Бренды по названию

Популярные бренды

Nortel Passport 8250, Руководство по интерфейсу командной строки

Результаты поиска

Содержание Passport 8250

Отзывы:

Бренды по названию

Популярные бренды