Nortel Passport 8250, Руководство по интерфейсу командной строки

Страница: 38 / 94

38 Chapter 3 Provisioning ports and connections
241-5101-201 R2.2
[MaxBuffSize=<value>]
is the size of the buffer memory that Passport
8250 uses for storing the reassembled cell stream. It is measured in 10
microseconds.
[CAS=<cas type>]
is the type of connection to map to the port
[cbrclock=<cbrClockMode>]
is the CBR clock mode for the
connection.
See “Map command parameters” (page 38) for possible values for the map
command parameters.
For the default cdvt and MaxBuffSize values for DS-1/E1 structured Basic
and structured CAS connections, see “Cdvt and MaxBuffSize parameters
default values” (page 40).
Table 5
Map command parameters
Parameter Values
<port#i> 1 -16
[,<#j>] 2 -16
The [,<#j>] parameter must be greater than the <port#i>
parameter.
[<time slots>] See “Time slots” (page 71) for information on converting time slots
to hexadecimal.
<VPI#k> 0 - 255
See “VPI/VCI assignments” (page 36) for the rules on using VPI
numbers.
<VCI#l> 0 - 65534
For multiple ports, the first port is assigned the VCI number and
the VCI increments by one for each subsequent port.
See “VPI/VCI assignments” (page 36) for the rules on using VCI
numbers.
(Sheet 1 of 3)