Nortel CallPilot 1001rp, Руководство по установке и настройке

Страница: 27 / 368

October 2002 Troubleshooting your CallPilot system
Part 5: 1001rp Server Maintenance and Diagnostics 27
POST error codes and messages
The on-screen display of POST codes is not supported on CallPilot servers.
However, the POST error codes and descriptions are included in this section
for reference purposes.
1-2 ROM checksum error; no/faulty video card. Initialize all
ISA and PCI option ROMs.
1 One short beep before boot.
Beep code POST code Description / test point
1-1-1-3 02 Verify Real Mode
1-1-2-1 04 Get CPU type
1-1-2-3 06 Initialize System Hardware
1-1-3-1 08 Initialize chipset registers with initial POST
values
1-1-3-2 09 Set in POST flag
1-1-3-3 0A Initialize CPU registers
1-1-4-1 0C Initialize cache to initial POST values
1-1-4-3 0E Initialize I/O
1-2-1-1 10 Initialize Power Management
1-2-1-2 11 Load alternate registers with initial POST
values
1-2-1-3 12 Jump to UserPatch0
1-2-2-1 14 Initialize keyboard controller
Beep sequence Error message and conditions