Nortel CallPilot 1001rp, Руководство по установке и настройке

Страница: 202 / 368

Performing RAID maintenance Standard 1.0
202 CallPilot
To back up the existing RAID configuration
It is important to back up the current configuration to a floppy disk before
you make any changes to the configuration of the RAID controller. This
enables you to recover the configuration of the RAID controller if any
mistakes are made while executing the procedure.
1 Shut down and restart the CallPilot server.
2 While the server is restarting, the RAID controller is detected, and a
prompt appears to “Press Alt-R for RAID Configuration Options.” Press
Alt-R to launch the RAID controller configuration program.
Result: The Mylex Raid EzAssist program starts. A Notice message may
appear before the RAID controller selection window appears.
Note: If you miss the “Press Alt-R” prompt, you can press Reset to
restart the server before the system finishes booting to Windows NT. If
you reach the Windows NT Operating System selection screen, you have
missed the “Press Alt-R” prompt.
3 From the RAID controller selection window, press Enter to select the
AcceleRAID 352 controller.
Result: A pop-up menu appears. The remainder of this document refers
to this first menu as the main menu.
4 Insert a floppy disk that you want to use to back up the RAID
configuration.
5 Select Advanced Options, and then press Enter.
Result: The advanced options pop-up menu appears.
6 Select Backup Configuration, and then press Enter.
Result: The system prompts you to enter a filename for the RAID
controller configuration backup.
7 Enter a filename for the RAID controller configuration backup (for
example, a:\original.cfg), and then press Enter.
Result: The RAID configuration is backed up on the floppy disk.
8 Remove the floppy disk from the floppy drive.
9 Press Esc to return to the main menu.