Nortel CallPilot 1001rp Скачать руководство пользователя страница 232

Страница: 232 / 368

Performing RAID maintenance

Standard 1.0

232

CallPilot

Press any key to continue.

Result:

The configuration is saved.

Continue with “To back up the RAID configuration” below.

To back up the RAID configuration

Select Tools from the DAC960 Configuration Utility main menu, and then
press Enter to display the Tools menu.

Select Backup/Restore conf, and then press Enter.

Result:

A cautionary message appears.

Press any key to acknowledge the cautionary message.

Result:

The system displays the Backup and Restore Configuration

submenu.

Select Backup Configuration, and then press Enter.

Result:

The system displays the Enter File Name pop-up window.

Type

a:\

and the name of the backup file (for example, a:\raidback), and

then press Enter.

Result:

The system displays a warning,

Existing file, if any

will be overwritten

Select Yes.

Result:

The RAID configuration is backed up on the floppy disk. A

message appears when the backup has been successfully completed.

Press Esc to return to the Main Menu.

CAUTION

Risk of data loss

You must save this file to drive A on a floppy disk; otherwise,
you may not be able to restore the RAID configuration if the
RAID card fails.

Ensure the floppy disk is stored in a safe and accessible
location.

Содержание CallPilot 1001rp

















































































































































































































































































































































































Результаты поиска

Содержание CallPilot 1001rp

Отзывы:

Бренды по названию

Популярные бренды

Nortel CallPilot 1001rp, Руководство по установке и настройке

Результаты поиска

Содержание CallPilot 1001rp

Отзывы:

Бренды по названию

Популярные бренды