Nortel CallPilot 1001rp Скачать руководство пользователя страница 230

Страница: 230 / 368

Performing RAID maintenance

Standard 1.0

230

CallPilot

Repeat steps 6 to 9 for System Pack B (if applicable), and then for
System Pack C (if applicable).

Note:

There is no need to press Esc after you finish creating the last

System Pack. The last System Pack is automatically closed, and the
cursor control moves to the Pack Definition menu.

Select Arrange Pack, and then press Enter.

Select a drive from System Pack A (for example, A-0), and then press
Enter.

Result:

The System Pack is arranged.

Repeat step 12 for a drive in System Packs B and C (if applicable).

Result:

When all System Packs are arranged, the system returns you to

the New Configuration menu.

Select Define System Drive, and then press Enter.

Result:

The System Drive Definition menu appears.

Select Create System Drive, and then press Enter.

Result:

The system prompts you to choose which RAID Level to use.

Select RAID 1, and then press Enter.

Result:

The system prompts you to enter the size of the first system

pack.

Enter the size of the system pack as specified in “RAID system pack
sizing” on page 227, and then press Enter.

Result:

The system prompts you to confirm that you want to create this

system drive.

Select Yes.

Result:

The system pack is created and listed with its settings.

Repeat steps 16 to 18 for the remaining system packs. When you finish,
press Esc to exit to the Create System Drive window.

Result:

The system packs are defined.

Содержание CallPilot 1001rp

















































































































































































































































































































































































Результаты поиска

Содержание CallPilot 1001rp

Отзывы:

Бренды по названию

Популярные бренды

Nortel CallPilot 1001rp, Руководство по установке и настройке

Результаты поиска

Содержание CallPilot 1001rp

Отзывы:

Бренды по названию

Популярные бренды