Norstar Voice Mail 4.0, Руководство по установке и эксплуатации

Страница: 45 / 258

Setting up an Automated Attendant
31
P0886600 Issue 1.0 Set Up and Operation Guide
Programing which lines will be answered by Norstar Voice Mail
Norstar Voice Mail is able to answer all of your incoming lines, or just those lines
you specify. Before Norstar Voice Mail will answer an incoming line, you must
assign the line and set the Answer status to Yes. Each line added is answered by
Greeting Table 1, unless another table is specified.
For information about the incoming line numbers used in your company, refer to
your Norstar Voice Mail Programing Record. The maximum number of lines is
500.
Adding lines and assigning a Greeting Table
To add a line and assign a Greeting Table:
For more information about line answering, refer to "Setting the Answer Lines
status" on page 42.
1. Press
ƒ · ° ‹ .
2. Enter the System Coordinator Mailbox number
and password, then press
OK
.
3. Press
AA
.
4. Press
LINES
.
5. Enter the line number and press
OK
.
6. Press
CHNG
to change the Answer status from
N
to
Y
.
7. Press
TABLE
.
8. Press
CHNG
.
9. Enter a Greeting Table number (from 1 to 4)
and press
OK
.
10. To continue adding lines, press
NEXT
and
repeat steps 5 to 9.
Press
® to end this programing session.
Log:
QUIT RETRY
Admin
MBOX
OTHR
Auto Atdt Admin
GRTG TABLE
Line number:
RETRY
Line:1 Ans:N
TABLE NEXT
Line:1 Ans:Y
CHNG
NEXT
Line:1 Table:1
RINGS NEXT
Grtg table:
RETRY
Line:1 Table:1
CHNG RINGS