Nordson Encore Select HD Скачать руководство пользователя

Страница: 57 / 57

UK DECLARATION of Conformity

Nordson Corporation

•

555 Jackson St, Amherst, Ohio 44001. USA

DOC14063-01

This Declaration is issued under the sole responsibility of the manufacture.

Product: Encore Enhance Powder Spray Systems

Models:

Encore Enhance Dual Manual Unit, Encore Enhance Dual Auto Unit, Encore Enhance Manual Interface,

Encore Enhance Stack. Applicators for use with these controls are Encore Auto, Encore HD Auto, Encore Select

HD Auto Robot and Encore XT/HD Manual.

Description:

This is an electrostatic, powder spray system, including Manual and Auto applicators, control cables

and associated controllers. The Manual & Automatic Controllers are available in different configurations mounted

on a power distribution enclosure.

Applicable UK Regulations:

Supply Machinery Safety 2008

Electromagnetic Compatibility Regulation 2016

Equipment & Protective Systems Intended for use in Potentially Explosive Atmosphere

Reg 2016

Standards Used for Compliance:

EN/ISO12100 (2010) EN60079-0 (2014) EN61000-6-3 (2007) FM 7260 (2018) EN50050-2 (2013)

EN60079-31 (2014) EN61000-6-2 (2005) EN55011 (2016)

Principles:

This product has been designed & manufactured according to the Directives & standards / norms described above.

Type of Protection:

- Ambient Temperature: +15ºC to +40ºC

- Ex tb IIIB T60ºC / Ex II 2 D / 2mJ = (Encore XT and HD Manual Applicators)

- Ex tc IIIB T60ºC Dc / Ex II (2) 3 D = (Enhance Manual Interface Controller)

- Ex II (2) D = (Enhance Stack Controller) – Located in Unclassified Location (Zone)

- Ex II 2 D / 2mJ = (Encore Auto Applicator, Encore HD Auto Applicator and Encore Select HD Robot Appl)

Certificates:

- FM21UKEX0129X = Encore XT and HD Manual Applicators (Maidenhead, Berkshire, UK)

- FM21UKEX0241X = Controls (Maidenhead, Berkshire, UK)

- FM22UKEX0006X = Encore Automatic Applicator (Maidenhead, Berkshire, UK)

- FM21UKEX0223X = Encore HD Automatic Applicator (Maidenhead, Berkshire, UK)

EX Quality System Certificate

- SGS Baseefa NB 1180 (Buxton, Derbyshire, UK)

___________________

Date:

06Jan22

Jeremy Krone

Engineering Manager

Industrial Coating Systems

Amherst, Ohio, USA

Nordson Authorized Representative in the UK

Contact:

Technical Support Engineer

Nordson UK Ltd.; Unit 10 Longstone Road

Heald Green; Manchester, M22 5LB.

England

Содержание Encore Select HD


























































Результаты поиска

Содержание Encore Select HD

Отзывы:

Похожие инструкции для Encore Select HD

Бренды по названию

Популярные бренды

Nordson Encore Select HD, Руководство пользователя по изделию

Результаты поиска

Содержание Encore Select HD

Отзывы:

Похожие инструкции для Encore Select HD

Бренды по названию

Популярные бренды