Nordson Encore Select HD, Руководство пользователя по изделию

Страница: 28 / 57

© 2022 Nordson Corporation
1620445-03
4-8 Operation
Maintenance Procedures
Component Procedure
Spray Gun
(Daily)
1. Point the spray gun into the booth. Remove the suction line from the hopper or box feeder and
point them in the booth, as well. Push the Color Change button on the system controller and
purge the powder delivery system.
2. Remove the nozzle and electrode assembly and clean them with low pressure compressed air
and clean cloths. Check them for wear, and replace them if necessary.
3. Clean the spray gun face surface (where the electrode assembly attaches) with low pressure
compressed air and a clean cloth.
4. Blow off the spray gun and wipe it down with a clean cloth.
System Grounds
Daily: Make sure the system is securely connected to a true earth ground before spraying powder.
Weekly: All grounds should be inspected weekly at minumum.