Nordson Encore Select HD страница 54 Скачать руководство пользователя

Страница: 54 / 57

Nordson Corporation

•

555 Jackson St, Amherst, Ohio 44001. USA

DOC14034-06

EU DECLARATION of Conformity

This Declaration is issued under the sole responsibility of the manufacture.

Product: Encore XT / HD Manual Powder Spray Systems

Models:

Encore XT Manual, Fixed Mount or Mobile Dolly unit.

Encore Auto Applicator with Encore XT controls for a single gun, automatic systems.

Encore HD Manual, Fixed Mount or Mobile Dolly unit.

Encore Select HD Robot Applicator with Encore HD controls for robot systems.

Description:

These are electrostatic, powder spray systems, including applicator, control cables and

associated controllers. The Encore XT Manual system uses venturi style pump technology for supplying

powder to the spray gun. While the Encore HD Manual system uses high density pump technology for

supplying powder to the spray gun.

Applicable Directives:

2006/42/EC - Machinery Directive

2014/30/EU - EMC Directive

2014/34/EU - ATEX Directive

Standards Used for Compliance:

EN/ISO12100 (2010) ISEN60079-0 (2014) EN61000-6-3 (2007) FM 7260 (2018) EN50050-2 (2013)

EN1953 (2013)

EN60079-31 (2014) EN61000-6-2 (2005) EN55011 (2016) EN60204-1 (2018)

Principles:

This product has been designed & manuf. according to the Directives & standards / norms described above.

Type of Protection:

- Ambient Temperature: +15ºC to +40ºC

- Ex tb IIIB T60ºC / Ex II 2 D / 2mJ = (Encore XT and HD Applicators)

- Ex tc IIIB T60ºC / EX II (2) 3 D = (Controllers)

- Ex II 2 D / 2mJ = (Encore Auto Applicator and Encore Select HD Robot Applicator)

Certificates:

- FM14ATEX0051X = Encore XT/HD Manual Appl. And Encore Select HD Robot Appl. (Dublin, Ireland)

- FM14ATEX0052X = Controls (Dublin, Ireland)

- FM11ATEX0056X = Encore Automatic Applicator (Dublin, Ireland)

ATEX Surveillance

- 0598 SGS Fimko Oy (Helsinki, Finland)

Date:

20NOV20

____________________________

Jeremy Krone

Supervisor Product Development Engineering

Industrial Coating Systems

Amherst, Ohio, USA

Nordson Authorized Representative in the EU

Contact:

Operations Manager

Industrial Coating Systems

Nordson Deutschland GmbH

Heinrich-Hertz-Stra

e 42-44

D-40699 Erkrath

Содержание Encore Select HD


























































Результаты поиска

Содержание Encore Select HD

Отзывы:

Похожие инструкции для Encore Select HD

Бренды по названию

Популярные бренды

Nordson Encore Select HD, Руководство пользователя по изделию

Результаты поиска

Содержание Encore Select HD

Отзывы:

Похожие инструкции для Encore Select HD

Бренды по названию

Популярные бренды