Nordson Encore Select HD, Руководство пользователя по изделию

Страница: 30 / 57

© 2022 Nordson Corporation
1620445-03
5-2 Repair
Power Supply and Powder Path Replacement
Spray Gun Disassembly
1. See Figure 5-1. Unscrew the nozzle nut (1) and remove the nozzle (2) and electrode
assembly (3) from the spray gun.
2. Remove the end cap (11) by removing the two M3 screws.
3. Insert a small screwdriver into the recess in the J2 gun harness/power supply
connectors to release the catch and disconnect them.
4. See Figure 5-2. Remove the black nylon screw (14) from the gun body.
5. Grasp the lower body (15) in one hand and the gun body (6) in the other. Press the
thumbs of each hand together while pulling carefully in opposite directions to separate
the gun body from the lower body. The air wash tubing from the filter assembly (7) will
prevent a complete separation; leave it connected unless it must be replaced.
6
14
15
11
Figure 5-2 Spray Gun Body Disassembly