Nordson Asymtek Spectrum S-920, Инструкция по установке, эксплуатации и обслуживанию

Страница: 155 / 238

Operation 6-31
Figure 6-27 Create Pattern Dialog Box
3. For this example, enter
C1Line
as the name for the new pattern.
4. In the Fiducial section of the window, select
None
for no fiducials and click
OK
.
5. Repeat Steps 1 to 4 and create a pattern called
C2Dot
.
To add program commands to your pattern:
1. Click on the arrow in the Pattern textbox and select
C1Line
.
See Figure 6-28.
Figure 6-28 Selecting a Pattern
2. Insert program instructions into the C1Line pattern by clicking the appropriate icons on the
Program Commands Toolbar and following the screen prompts. Refer to the
Fluidmove User
Guide or Online Help for programming instructions.
3. Repeat Steps 1 and 2 to insert program instructions for the C2Dot pattern.