Nordson 7440272, Быстрый старт

Страница: 3 / 21

Pro-Meter V2K
1. With the aid of an assistant, place Pro−Meter V2K system on a suitable work bench or table. Be sure
work bench or table is capable of safely supporting Pro−Meter V2K. The weight of the preassembled
Pro−Meter V2K is approximately 120 lbs. (54.4 kg). System dimensions are 30.38 inches (771.65 mm)
long x 17.37 inches (441.2 mm) wide x 11.88 inches (301.75 mm) tall.
1. Remove primary cover (1) and secondary cover (2) from Pro-Meter V2K.
2. Connect the HMI pendant harness male connectors to the P5 (blue) and P6 (red) female connectors
located at the power supply. Refer to the System Layout Drawing for additional information.
NOTE:

The HMI pendant harness connectors are labeled P5 and P6 and are unique to the connectors
located on the power supply.

Operator interface is conducted via the HMI pendant. The HMI pendant consists of a touchscreen
attached to the main body of the Pro-Meter V2K and has a 2 meter cord which plugs into the power
supply. The HMI pendant also has an emergency stop button. Once pressed, it will immediately halt
movement of the Pro-Meter V2K until the emergency stop button is manually pulled back out. This
serves to manually reset the Pro-Meter V2K.
Safety
S ystem Setup
3