Nordson 7440272, Быстрый старт

Страница: 7 / 21

Pro-Meter V2K
Linear Position Sensor
1. Ensure the system pressure regulator is set to 80-100 psi (5.5 - 6.9 bar).
2. Utilize a 1/8 inch or 3 mm hex key to adjust the air cylinder flow controls.
WARNING:

Prior to initiating any adjustments, completely close the air cylinder flow controls.

Slowly open the flow controls at ¼ turn intervals until the desired flow rate is achieved.
3. From the
Main Menu
Screen, proceed to the
Setup Login
Screen, to the
Level 1 Setup
Screen, and then
to the
Valve Setup
Screen.
4. Hold the ADVANCE RODS push button until the metering cylinder carriage is fully forward. Then the
metering cylinder carriage is fully forward, the air cylinder has been fully retracted
7