Nordson 7440272, Быстрый старт

Страница: 15 / 21

Pro-Meter V2K
Stroke Length Setup
1. Determine how much material is needed per dispense cycle (cc).
NOTE: For example, let’s assume 75cc per shot is needed. As one complete cycle dispenses 51.3cc, it
will require more than one stoke to reach the desired shot size. In this case, proceed from the Main
Menu Screen to the Setup Login Screen, and then to the Level 1 Setup Screen. Once at the Level 1
Setup Screen establish the following values:
 SHOTS PER CYCLE = 2
 DISPENSE POSITION = 0
 RELOAD POS (MM) = 105.2 (In this instance, the default value 144.0 has been changed to 105.2
so that the TOTAL TO DISPENSE data display equals as close to 75cc as possible.
Stroke Setup
2. From the Level 1 Setup Screen, proceed to the Valve Setup Screen.
3. Depress the ADVANCE RODS pushbutton until the air cylinder is fully retracted.
Stroke Length Setup
1. Determine how much material is needed per dispense cycle (cc).
NOTE: For example, let’s assume 75cc per shot is needed. As one complete cycle dispenses 51.3cc, it
will require more than one stoke to reach the desired shot size. In this case, proceed from the Main
Menu Screen to the Setup Login Screen, and then to the Level 1 Setup Screen. Once at the Level 1
Setup Screen establish the following values:
 SHOTS PER CYCLE = 2
 DISPENSE POSITION = 0
 RELOAD POS (MM) = 105.2 (In this instance, the default value 144.0 has been changed to 105.2
so that the TOTAL TO DISPENSE data display equals as close to 75cc as possible.
15