16
6 On/Off Control
The BlueCure lamps can be turned on or off in less than 50 ms via a control
voltage; for this reason, a shutter is not necessary. The lamp will only be activated
if it is needed.
CAUTION!
Attention:
If the lamp is not needed, turn it off to prevent heat from building. Even
if the surface of the lamp does not heat up, high temperatures may
develop in the area surrounding the lamp (e.g. every material in the
direct proximity, for which there is no air circulation).
Scenario 3:
- SPS-controlled
- Adjustment of the intensity from 20 to 100% via SPS
- Monitoring of errors via SPS
- Temperature monitoring via SPS
- Emergency shut-off functionality
S3 = Emergency shut-off switch
T2 = DC regulator
LAMP
DB15 Interface
Содержание BlueCure FL
Страница 2: ...2...
Страница 20: ...20 A Appendix A 1 Drawing of the BLUE CURE FL 8 0W 125X20 WC 395...
Страница 21: ...21...