1of2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,
.
.
.
2017 QuoizelInc.
Assembly Instruction Sheet #IS-WVR9007EK
For Style WVR9007EK
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
Please go to
for product cleaning tips. Go to the
selection.
(1) A21 Medium Base bulb 150W Maximum or
(1) Medium Base Vintage Bulb is recommended but not supplied.
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
www.quoizel.com
Care + Maintenance
Light Source:
Estimated Assembly Time:
Preparation:
Tools Required:
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Package Contents
A
Mounting Screw
x 3
Fixture Body
x 1
Glass
Panel
x 4
B
C
STEP 1
Remove Cage from Socket Assembly
-
A. Unlock lock screws on the bottom of the socket assembly and
remove the cage from the socket assembly.
C
Cage
Figure 1
Lock Screw
Socket Assembly
STEP 2
Install Glass Panels
-
A. Insert the Glass Panel (B) into the
cage with beveled edge is outside.
Attach the top edge of the Glass
Panel (B) to the slot in the top of the
cage. Fold tabs in the bottom edge of
the cage to secure Glass Panels (B).
Figure 2
Slot
Cage
Tab
B
STEP 3
Install the Bulb and Cage
-
A. Insert the bulb onto the socket and
screw snugly into place.
B. Place the cage back onto the socket
assembly and secure with previously
removed lock screws. Hand tighten
until snug.
Socket Assembly
Socket
Lock Screw
Vintage Bulb
(recommended
but not Supplied)
Figure 3
ReleasedDate:2017-08-31
Cage
