background image

Thank you for buying RAB Lighting fixtures. Our goal is to design the best quality products to get the job done right.  

We’d like to hear your comments. Call the Marketing Department at 888-RAB-1000, or email: [email protected]

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.

Floodzilla must be wired in accordance with the National Electrical Code and applicable local codes. Proper 

grounding is required to insure personal safety. Carefully observe grounding procedure. Floodzilla is for out-

door use and should not be used in areas of limited ventilation or high-ambient temperatures. All work should 

be done by a qualified electrician.

WARNING: 

Make certain power is OFF before installing or maintaining fixture.

LOCATION

Mount the fixture so that the lamp remains in a horizontal position. 

MOUNTING

Floodzilla is supplied with a trunnion, which can be mounted directly on a flat surface with the hardware you 

provide, or a slipfitter, mounting to a 2³/

8

” O.D. tenon. Make sure the fixture is securely fastened.

Trunnion:

Positioned to the right is a dimensioned drilling template 

for mounting the trunnion to a flat surface. 

The trunnion mounting offers five different positions,  

90 ̊, 60 ̊, 30 ̊, 20 ̊, 0 ̊(There are three positioning holes in the  

outer yoke and five positioning holes in the inner yoke).  

To make a selection, remove the positioning screw. Loosen  

trunnion bolts. Rotate trunnion to desired angle.  

Reinsert positioning screw and tighten.

Slipfitter:

 

The slipfitter mounting fits over a O.D.

 

2³/

tenon. Slip the mounting over the tenon and secure 

the fixture with the 2 set screws on the side of the slipfitter.
The angle of the fixture can be adjusted by removing the round  

cover plate from the side of the slipfitter by removing 2 screws. 

Loosen the locking bolt and swivel fixture. Tighten the locking  

bolt and re-attach cover plate. 

WIRING

1. Connect the black fixture lead to the HOT supply lead
2. Connect the white fixture lead to the common supply lead
3. Connect the ground fixture lead to the ground supply lead

FLOODZILLA 

Reviews: