60
Create Declaration of Conformance from T-Box XL™ Conformance Data
Note: Declarations of Conformance can only be produced for ISO 6789 tool types.
Declarations of Conformance do not use uncertainty values in the respective tool templates ‘Uncertainty’ tab.
1. Conformance test a
Tool
on T-Box XL™
and then Synchronize with TDMS.
2. Select
Conformance Data
to show results
in the right hand pane.
3. Right click on the Conformance Data to show
the drop down menu.
4. Select
Create Conformance Declaration
5. Select or enter an
Inspector
(this must be entered)
.
6. Enter Certificate
Number
(if required)
7. Enter the
Temperature
(in degrees C)
that the calibration was performed
(this must be entered)
.
8. Enter
Certificate
Text
Choose either
As
Found
or
As
Left
from the drop down
or enter your own text.
9. If the same tool has other conformance data to put on the same declaration of conformance, press
Select Results
This feature allows clockwise & anti-clockwise as well as ‘as found’ & ‘as left’ results to be included on
the same declaration of conformance.
To add another calibration to the same declaration of conformance double click on the required results.
Содержание T-Box 43236
Страница 2: ......
Страница 47: ...45 4 Select Yes No or Cancel...
Страница 60: ...58 If the measurement system and temperature comply with ISO 6789 2 2017 the certificate will be generated...
Страница 79: ...77 Load Tools File 1 Select Options then select Load Tools File 2 Browse to the Tools txt file then select Open...
